Honda CBR 1000RR Forums banner

Two Brothers full exhaust

1K views 4 replies 4 participants last post by  capt.america 
#1 ·
Just changed out sprockets, went with 15/42, and got a new Chaim from DiD. 520 conversion. Full exhaust, titanium can, and juice box were put on as well. Going for the block off plates soon to try to correct the shitty engine breaking and the backfiring issue.
Next mod, upgrading brake lines, and rotors. ?
 
#3 ·
How much this two bros full system costs?
Get bazaz zfi ,don't put the juice box
You need to do the flapper intake mod and the Pair plates mod too.
Get a bmc air filter or k&n
Upgrade the brake lines only for now. No need for the rotors.
 
#4 · (Edited)
Get rid of the juice box and buy a Power Commander or ZFI. Juice box is made by dynojet anyway however it is really very.....well it's craps. I'll tell you from personal experience that spending the extra few dollars in regards to your bike is usually better.

Do the Pair block off, and exhaust servo mods. STICK WITH STOCK AIR FILTER.
 
#5 ·
Full exhaust on a '08+ is a waste of $$. Stock headers are so good you will only see a couple ponies on the top end. $$ would have been better spent on PCV or Bazzaz and a dyno tune.

+1...... Juice box does suck.
+1...... Stock air filter is much better for street.
+1...... Intake flapper mod and block offs.

Be safe out there. :th_salute:th
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top