12-06-2012, 02:13 AM
|
#1
|
|
Member
Join Date: Sep 2012
Posts: 33
|
'08 Blade - Defect Dynojet QEM quick-shift
Hello guys.
I have bought a secoundhand Dynojet PC-5 and quickshift (QEM and kill-switch)
But the Quick-shift modul (QEM) has a defect.
When I got the parts, 2 wires vere loose. A gray and a red.
To each injector, goes 2 colored wires. One for the male and one for the female connector. Theese two is then connected by a gray wire.
- The gray wire that were loose were missing in one of the connectors on injector 4.
The problem is now, that I have 2 wires and a gray between the male and female on each injector.
- But I still have a loose red wire with "no home" - And it must go somewhere!
I have been checking powercommander.com, dynojet.com and googl'ed pictures, BUT can't find a clear picture of where the red wire goes
I belive that the colors is the same for all-04-12 fireblades with the QEM mounted.
Can anyone remember where the red wire goes? Or are anyone nice enough to check if for me?
- Thanks guys!!
Regards
Emil - Denmark
|
|
|
|