2004 Gauges aren't working but it still starts : Honda CBR 1000RR Motorcycle Forums: 1000RR.net

crazendisturbed · 10-27-2009, 12:57 PM

I was looking through the forum to see if somebody have encountered what i've encountered and the closest thing is the stator problem. I'm not sure if it is a stator problem, but i would like to have you guys input on this. I don't believe it's a stator problem because then the battery would be dead. The problem is some of the gauges are dead. The only thing working right now is the turn signal lights on the dash. I was letting my motorcycle warm up and all of the sudden everything went blank. The motorcycle still runs but when i turn the key none of the lights and tach move or turn on.

philip1000rr · 10-27-2009, 01:01 PM

Check the connection between the dash and the wiring harness. It may have become loose.

sixer · 10-27-2009, 01:40 PM

fuse.

philip1000rr · 10-27-2009, 01:43 PM

Quote:

Originally Posted by sixer

fuse.

More probable than a loose dash connection.

crazendisturbed · 11-07-2009, 01:14 PM

Thanks everyone it was a fuse... ugh it's such a pain removing the plastic screw things.

rav_in_sb · 11-14-2012, 02:40 PM

Which fuse was it, I just had the same issue with my '07. Turn signals and high beam light up, everything else is dead on the dash.

1320Whtrex · 11-14-2012, 03:06 PM

Quote:

Originally Posted by rav_in_sb

Which fuse was it, I just had the same issue with my '07. Turn signals and high beam light up, everything else is dead on the dash.

Have you tried just going through all of your fuses regardless?

COBRA90GT · 11-14-2012, 03:19 PM

^ This - just check the fuses already.

FWIW I had the "meter/illumi" fuse blow on my '11 and had similar dash/speedo cluster symptoms (can read about it under the thread I created awhile back rav_in_sb). Same concept even though it isn't an '07 bike !

rav_in_sb · 11-14-2012, 05:23 PM

Quote:

Originally Posted by 1320Whtrex

Have you tried just going through all of your fuses regardless?

It actually happened on my way to work today. I get off at 4:30 so I was hoping someone could save me a little work by directing me to the right fuse.

winslo16 · 11-14-2012, 05:43 PM

Same thing happened to me. I blew like 10 fuses in a week and then it just quit.

Sent from my SGH-I997 using Motorcycle.com Free App