Rvt100r RC51 Wheel Swap info

[dpower]

Adrian, did you have to place any spacers behind the bearings (1mm per side, etc)? Also, did you have to add anything extra to either side of the wheel (2mm spacer, etc)? I got some SP1 wheels that I'm going to install on my 2007 and I noticed that the indentation is not there like it was on a SP2 front wheel that I did on my 2006. Where your SP1s like that?
Any others that have done the SP1s on 2006-2007s are welcomed to respond.
Thanks.

[Jmnismo]

Let me know if you go through with it man! Its on the of my lists of things to do this winter! And I to, wanna do the sp1's!

[Hondanight]

Originally Posted by styles

Can u do a write up in what you did to make it work? Really would like to know! Thanks!!

Page 16 post 2. I covered everything there. If you need more specifc info pm me. The most important thing is the machining and make sure its perfect!

[dpower]

Just finished my 2007 repsol with SP1 wheels.

[Jmnismo]

Looks freaking awesome man!!

[R1nStang]

I know this thread is for a different model year but I'm looking at a '12 CBR to '09 R1 wheel swap. Anyone on here with a '12 cbr1000rr willing to get some #'s for me?

width of the wheel from the rotor mounts (front)

Distance from center of wheel to center of sprocket (rear)

Distance from center of wheel to center of rotor (rear)

And Wheel bearing sizes (measure the width of front and rear axle)

attached is the pic of rims from the 2012 CBR1000rr that I would like to swap over to.

Thanks!

i attempted to start a new thread on this but was told i didnt have the privileges to do that just yet being a new member.

[Nefty]

Wauw mean looking mod!! i will stick like glue on ebay till i fine a set of those hahaha

[INDUSTRY PERFORMANCE]

looks nice man!!

[INDUSTRY PERFORMANCE]

I want to do this swap also, let me know what you find out, if they are interchangable.....

Originally Posted by R1nStang

I know this thread is for a different model year but I'm looking at a '12 CBR to '09 R1 wheel swap. Anyone on here with a '12 cbr1000rr willing to get some #'s for me?

width of the wheel from the rotor mounts (front)

Distance from center of wheel to center of sprocket (rear)

Distance from center of wheel to center of rotor (rear)

And Wheel bearing sizes (measure the width of front and rear axle)

attached is the pic of rims from the 2012 CBR1000rr that I would like to swap over to.

Thanks!

i attempted to start a new thread on this but was told i didnt have the privileges to do that just yet being a new member.