HID lights

[Visionary]

Has anyone put these on? Is it difficult to install?

http://www.superbikesupply.com/mm5/m..._Code=hid-kits

[TexasTraffic]

Yes - I have the same (or similar) set on my bike.

You have to do the Flapper mod to make room.

Without that mod, it is a difficult install.
With the mod, it gets a lot easier.

[rav_in_sb]

You do not need to do the flapper mod to install, there is plenty of room for the ballast. What I would recommend are some H7 spacers (see below link) and the H7 to HID ballast connector. The spacers are a must as the bulbs will be loose without it and the grommets shown are designed to work with the '08+ bikes. The H7 adapter is optional as it will make for a much cleaner install and make it easy to revert back to Halogens if ever needed. Take a look at mine, almost looks stock!! My bike is an '07 just like yours.

http://www.ebay.com/itm/MOTORCYCLE-H...49cfe2&vxp=mtr

http://www.ebay.com/itm/2-H7-Wire-Ha...bd6311&vxp=mtr

[rav_in_sb]

I'll be at the Long Beach Motorcycle show tomorrow morning if you want to take a look at it in person.

[Visionary]

Awesome! Thanks man i appreciate the input, i will be at the show too, but im going to be coming from work so i'll be in a suit(business) and not with my bike

[Bazz]

Originally Posted by rav_in_sb

You do not need to do the flapper mod to install, there is plenty of room for the ballast. What I would recommend are some H7 spacers (see below link) and the H7 to HID ballast connector. The spacers are a must as the bulbs will be loose without it and the grommets shown are designed to work with the '08+ bikes. The H7 adapter is optional as it will make for a much cleaner install and make it easy to revert back to Halogens if ever needed. Take a look at mine, almost looks stock!! My bike is an '07 just like yours.

http://www.ebay.com/itm/MOTORCYCLE-H...49cfe2&vxp=mtr

http://www.ebay.com/itm/2-H7-Wire-Ha...bd6311&vxp=mtr

Where did you place your ballasts then?

[rav_in_sb]

The left one fit under the upper left fairing and the right one is located under the front fairing mount. A little bit of VHB tape works wonders!!