Rear Brake Line Install Helpthatdarkknight 08-23-2008, 01:37 PM i am in the process of installing my ss galfer lines. and i have a gcraft rear res. and when i go to put the rear line on it looks like i will be losing my rear brake light usage with the rear brake. is this right? do i have to remove all that to install the rear line? The_Doctor 08-23-2008, 01:39 PM Should not affect the brake light switch at all. thatdarkknight 08-23-2008, 02:04 PM well then what is the gray line that is attached to the banjo bolt? it is a size 14mm and it has 2wires going into the top of the bolt. it goes under the rear set towards the front of the bike. if i install the galfer banjo, what do i do with this other piece? The_Doctor 08-23-2008, 02:08 PM Re-use the banjo with the wires. thatdarkknight 08-23-2008, 02:11 PM the galfer line dosnt fit over the old banjo bolt. it wont fit over the more top part The_Doctor 08-23-2008, 02:12 PM Then I guess you will have to go without the rear light. thatdarkknight 08-23-2008, 02:14 PM lol i guess so, just wanted to see if there was something i was missing. thanks Silvy 08-23-2008, 02:42 PM Rear brake light is over-rated. I've been without for 10 months, no problemo. Strand 08-23-2008, 03:04 PM Are you nuts? Silvy 08-23-2008, 05:17 PM Are you nuts?
If you're asking me, no. While approaching a light, I flash with the fronts. It's easier to get attention that way. | |