PC V for CBR1000RR Finally released -

Just letting all of you know who have been waiting and waiting and waiting, Dyno Jet Finally released these for the CBR1000RR


http://www.hardracing.com/images/Img130.gif

http://www.hardracing.com/images/pcv.jpg

So what is the pricing going to be like?

So what is the pricing going to be like?


Few dollars more then PCIIIusb

$269


.

These are for the 08 and up only right?

These are for the 08 and up only right?

DJ of course ONLY Supports 2009.

AS far a we know... 08-09 for now.

No one has tried on 04-07 yet.



.

Few dollars more then PCIIIusb

$269


.

Wow, not bad. That is like a 50 dollar difference from the bazzaz. Thanks.

awesome! i hope that's not the actual picture, because we need some more connectors!

can someone explain the benifits of this over the pcIII im guessing it has more functions like the bazzaz

can have 2 maps loaded if I am not mistaken and toggle between the two easily.

You can also add the auto tune module. Uses an O2 sensor to monitor Air/fuel ratio while riding.

How much does the autotune module run? and does it come with the O2 sensor?

How much does the autotune module run? and does it come with the O2 sensor?
List price is $249 and it comes with the wideband O2 sensor per DynoJet's website. So I'm sure one of our sponsors can get it to us cheaper than that.

List price is $249 and it comes with the wideband O2 sensor per DynoJet's website. So I'm sure one of our sponsors can get it to us cheaper than that.


Yea, we way less then that. :thumbsup:


.

so is this better than the power commander and ignition module which i still have but never installed b/c of bike issues??? or should i just keep mand install what i have later when i finally get my bike fixed

so is this better than the power commander and ignition module which i still have but never installed b/c of bike issues??? or should i just keep mand install what i have later when i finally get my bike fixed


You mean, the PC V..? being better then the PCIIIusb.

Depends on how much "extras" you need.

For regular mapping it will do the same.

When both are setup properly, the outcome will be the same.

.

Sounds like a good deal on the V..DJ retails them for $359

Sounds like a good deal on the V..DJ retails them for $359

Yea, @ $269 That's about $90 discount. Not too shabby. :thumbsup:


.

wow.. hell of a deal.. (now i need to figure out what to sell )

So the PC V is 269$ an the auto tune module is 249$ right? The O2 sensor it comes with is a wideband obviously? I imagine they dont last long with leaded gas right?

So the PC V is 269$ an the auto tune module is 249$ right? The O2 sensor it comes with is a wideband obviously? I imagine they dont last long with leaded gas right?
Why would you be using leaded gas in a current model blade? Where would you even find leaded gas for that matter?

Why would you be using leaded gas in a current model blade? Where would you even find leaded gas for that matter?

117 Race gas. It only comes leaded. I think anything above 110 is leaded. But there may be 110 thats unleaded. I'm looking to do all of the bolt ons and then have the bike tuned on a higher octane gas so I can run more advanced timing and leaner AF ratios. Higher octane gas is less prone to detonation (pre ignition). I'm ONLY going to ride the bike on race gas. I love this idea of the PC5/Auto tune feature but if its going to blow out O2 sensors then I'll run the highest octane unleaded I can find which is going to be 105-110. I can actually get leaded 117 easier then unleaded 110 (If I can find it at all)

So the PC V is 269$ an the auto tune module is 249$ right?

$269 & $199 (when purchased together with PCV) :thumbsup:


The O2 sensor it comes with is a wideband obviously? I imagine they dont last long with leaded gas right?

Correct. :th_down:
.

$269 & $199 (when purchased together with PCV) :thumbsup:



And how much is the ICM?

And how much is the ICM?

ICM ? :confused:

.

ICM ? :confused:

.


Ignition control module. Is thats what its called? The device that allows the ability to tune an ignition map, Its made by dynojet

**Edit** its just called Ignition Module. Sorry

http://www.powercommander.com/powercommander_iii_usb/powercommander_ignition_module.aspx

Ignition control module. Is thats what its called? The device that allows the ability to tune an ignition map, Its made by dynojet

**Edit** its just called Ignition Module. Sorry

http://www.powercommander.com/powercommander_iii_usb/powercommander_ignition_module.aspx
Problem is that the IM is only for the PCIII and not the PCV.

Problem is that the IM is only for the PCIII and not the PCV.


O yea, well the PCV has it built in right?

the PCV has it built in right?

No.

so how the hell do I tune ignition with a PCV then?

so how the hell do I tune ignition with a PCV then?

You have to wait until DJ releases the Ign. Module for the PC V.

Hopefully sometime soon... :thumbsup:


.

You have to wait until DJ releases the Ign. Module for the PC V.

Hopefully sometime soon... :thumbsup:


.

WEAK!!!

Hi everyone! Im fairly new to the site. Very happy today. I just received my pc5 from hardracing! My 08 and I will Ve having a little fun this weekend. Will be installing on Thursday. Shipping was fast and on time.
IMG_0078.JPG

I notice on your website the PC V is only applicable to 2009. People are installing these on 2008 models as well correct?

Hi everyone! Im fairly new to the site. Very happy today. I just received my pc5 from hardracing! My 08 and I will Ve having a little fun this weekend. Will be installing on Thursday. Shipping was fast and on time.
IMG_0078.JPG


Excellent. :thumbsup:

I notice on your website the PC V is only applicable to 2009. People are installing these on 2008 models as well correct?

Correct.

.

Any issues running them on the 2008 fireblade versus the 2009?

Any issues running them on the 2008 fireblade versus the 2009?


We have sold over 60 units for 2008 Model over past months.
We just put specific Map and settings to convert for 2008 model

So, far NO Issues at all. :thumbsup:


.

We have sold over 60 units for 2008 Model over past months.
We just put specific Map and settings to convert for 2008 model

So, far NO Issues at all. :thumbsup:


.

What kind of changes do u make from the 08/09 map ?