Figured I'd share a few pictures of my HID/projector retrofit that I threw in the CBR over the weekend. I was able to keep the factory reflectors and along with the "Mini Gatling Gun" shrouds I think it looks really good. I will say the retrofit was anything but esay I had to cut the factory reflectors and make custom brackets using the factory adjuster mounts. Also decided to ditch the mirrors while I was at it since I had to take them off anyway, block off plates are on the way. I got the kit from theretrofitsource.com, kit includes the following:
Motorcycle: Stage II Dual
Bi-xenon Projectors
2 x Morimoto Mini H1 LHD (7.0) $120.00
Slim Ballasts
2 x 35W: Morimoto XB35 Computer $70.00
Ballast Igniters (Required)
2 x Morimoto XB Igniter (AMP) $30.00
H1 HID Bulbs
2 x H1: XB 5500K $25.00
Shroud Style (Preference)
2 x Mini Gatling Gun $0.00
Wire Harness
1 x H7: Dual Output MotoCycle $25.00
I also decided to go with a red "demon eye" effect that was also a custom design. TRS offers demon eye kits but this was a lot cheaper and I installed this same kit on my 636 years ago and it worked out great so I figured I'd go the same route on the 1000
Motorcycle: Stage II Dual
Bi-xenon Projectors
2 x Morimoto Mini H1 LHD (7.0) $120.00
Slim Ballasts
2 x 35W: Morimoto XB35 Computer $70.00
Ballast Igniters (Required)
2 x Morimoto XB Igniter (AMP) $30.00
H1 HID Bulbs
2 x H1: XB 5500K $25.00
Shroud Style (Preference)
2 x Mini Gatling Gun $0.00
Wire Harness
1 x H7: Dual Output MotoCycle $25.00
I also decided to go with a red "demon eye" effect that was also a custom design. TRS offers demon eye kits but this was a lot cheaper and I installed this same kit on my 636 years ago and it worked out great so I figured I'd go the same route on the 1000