Runeknight95's Build 2008 Cbr1000rr!
MODS: If you could change the title to cbr1000rr from the cbr100rr Id apreciate it :\
I've had this brewing :stirpot: for a while now, picked up another 2008 cbr1000rr in candy glory red/silver and couldn't be happier. Picked it up for $7,000 with 3,000 miles on it and an asuarant warranty good until mid 2014.
Many thanks to Lexus Rx at www.superbikesupply.com for all the goodies, quick service and spending some time w/ me on the phone. Thanks to SilvR for the selling me the akrapovic slip on and install help. Thanks to Big Will for the DIY bazzaz install over at http://www.1000rr.net/forums/showthread.php?t=53242 and IcedTed89 for the help with the pair mod removal over at http://www.1000rr.net/forums/showthread.php?t=83364.
-Flapper Intake removed
-Smog AIS system removed w/ block off plates
-Screen Removed from stock airfilter
-Bazzaz z-fiTC w/ quickshifter
-Bazzaz Z-bomb (Thanks to Zach over at Tallahasseesportbikers.com)
-Bazzaz TC and Map switch
-Akrapovic carbon fiber slipon
-Moto R Spools
-Motovation Bar Ends
-Motovation Front fork slidersw
-Motovation Rear Axle sliders
-Motovation cut style Frame Sliders (thanks to wantoride1000rr) (to be installed)
-GB racing protection kit
-Competition Werkes Fender Eliminator
-Clear Alternatives integrated tailight(smoked)
-Stomp grip tank pads (black) (My favorite mod of them all :O)
-Pro grip tank protector (carbon fiber)
-Michellin Power One, A compound tires (190/55 rear)
-Custom tune from Turn-One Performance over in Milton, Florida (near Pensacola) (day is to be determined)
Before:
Started with an oil change :sleep006:
Removed mid fairings, to remove the flapper. Bad Idea, I removed the flappers while leaving the fairings on for my other cbr and it was much easier.
Removed the canister w/o taking off the front fairing though, the front fairing will bend foward enough to get it out of there if both mids are off
Plugged the remaining hose and left it here
Garbageeee
Motovation sliders
Gb Racing Kit, Brad (Lexus Rx) reccomended these to me and said they held up through a 175mph crash and no fluids leaked. Here are some pics to get an idea, I didnt realise they were going to be so large.
Airbox removal to get to smog plates and install bazzaz, screen removal on air filter simple yank it comes off
MODS: If you could change the title to cbr1000rr from the cbr100rr Id apreciate it :\
I've had this brewing :stirpot: for a while now, picked up another 2008 cbr1000rr in candy glory red/silver and couldn't be happier. Picked it up for $7,000 with 3,000 miles on it and an asuarant warranty good until mid 2014.
Many thanks to Lexus Rx at www.superbikesupply.com for all the goodies, quick service and spending some time w/ me on the phone. Thanks to SilvR for the selling me the akrapovic slip on and install help. Thanks to Big Will for the DIY bazzaz install over at http://www.1000rr.net/forums/showthread.php?t=53242 and IcedTed89 for the help with the pair mod removal over at http://www.1000rr.net/forums/showthread.php?t=83364.
-Flapper Intake removed
-Smog AIS system removed w/ block off plates
-Screen Removed from stock airfilter
-Bazzaz z-fiTC w/ quickshifter
-Bazzaz Z-bomb (Thanks to Zach over at Tallahasseesportbikers.com)
-Bazzaz TC and Map switch
-Akrapovic carbon fiber slipon
-Moto R Spools
-Motovation Bar Ends
-Motovation Front fork slidersw
-Motovation Rear Axle sliders
-Motovation cut style Frame Sliders (thanks to wantoride1000rr) (to be installed)
-GB racing protection kit
-Competition Werkes Fender Eliminator
-Clear Alternatives integrated tailight(smoked)
-Stomp grip tank pads (black) (My favorite mod of them all :O)
-Pro grip tank protector (carbon fiber)
-Michellin Power One, A compound tires (190/55 rear)
-Custom tune from Turn-One Performance over in Milton, Florida (near Pensacola) (day is to be determined)
Before:
Started with an oil change :sleep006:
Removed mid fairings, to remove the flapper. Bad Idea, I removed the flappers while leaving the fairings on for my other cbr and it was much easier.
Removed the canister w/o taking off the front fairing though, the front fairing will bend foward enough to get it out of there if both mids are off
Plugged the remaining hose and left it here
Garbageeee
Motovation sliders
Gb Racing Kit, Brad (Lexus Rx) reccomended these to me and said they held up through a 175mph crash and no fluids leaked. Here are some pics to get an idea, I didnt realise they were going to be so large.
Airbox removal to get to smog plates and install bazzaz, screen removal on air filter simple yank it comes off