What difference does this dog bone make ?
08 hrc linkage length
Hey guys does anyone have a hrc dog bone for there suspension part no 52470-mfl-r10. If so, could you tell me the mounting hole centres please.
Thx...
Thx...
1 - 15 of 15 Posts
Had measured...this a few months ago but cant remember exact#'s on how short they are.
between 10-12mm shorter than stock....increasing ride height and reduces shock travel,making suspension stiffer. i used 08-09 cbr600rr unit same thing
between 10-12mm shorter than stock....increasing ride height and reduces shock travel,making suspension stiffer. i used 08-09 cbr600rr unit same thing
thx mate will investigate.
If I recall last year they used those on the AMA superbikes at the beginning of the season and realized they weren't working as they expected and went back to the stock shock mounts.
Had measured...this a few months ago but cant remember exact#'s on how short they are.
between 10-12mm shorter than stock....increasing ride height and reduces shock travel,making suspension stiffer. i used 08-09 cbr600rr unit same thing
Was anybody able to confirm this????
Ken
Sorry for not posting earlier......10mm shorter and jacks up rear for those heavier 200lb+ riders stiffens up rear.substantially...i had to go one click off from stock on spring preload,leaving all other rear settings stock . iam 220lb'er and she feels great.Was anybody able to confirm this????
Ken
again......08-09 cbr600rr link
Cool, great info. So, is the 08 CBR1000 "HRC" link the same as the 07-08 CBR600 link???Sorry for not posting earlier......10mm shorter and jacks up rear for those heavier 200lb+ riders stiffens up rear.substantially...i had to go one click off from stock on spring preload,leaving all other rear settings stock . iam 220lb'er and she feels great.
again......08-09 cbr600rr link
shorter stroke???
incredible-- if a cbr1000rr 220rhp would run a shorter rear shock stroke then all the work on engine woulg go just on papers.
incredible-- if a cbr1000rr 220rhp would run a shorter rear shock stroke then all the work on engine woulg go just on papers.
with there was a link to a direct site
Stock dogbone 175mm put a 170mm dogbone in heaps better.
The same mod as earlier models.
The same mod as earlier models.
08-09 CBR 600RR PART IS 165MM
He said he weighed 220lbs. :beat:shorter stroke???
incredible-- if a cbr1000rr 220rhp would run a shorter rear shock stroke then all the work on engine woulg go just on papers.
1 - 15 of 15 Posts
- This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Honda CBR 1000RR Forums
A forum community dedicated to Honda CBR 1000RR motorcycle owners and enthusiasts. Come join the discussion about troubleshooting, performance, modifications, classifieds, maintenance, and more!
Full Forum Listing
Explore Our Forums
