i recommend not doing it unless you're a very patient person. it's easier when you know how to do it, but it's still a pain in comparison the the previous models. the entire ram air portion has to come off with it. once the fairing is actually loose, you have to disconnect an electrical connector as well as a vacuum line. there's a panel on the inside that has to come off as well as the panel underneath the nose. not a fun affair, but if anyone is planning on tackling it, i can try to give some pointers. i was expecting it to be fairly simple like my '06, but not so much!
spoolin7
- Status
Joined
·
20 Posts
I find it easy to remove the fairings, however i never undo the under/lower fairing fom the mid fairing i just undo both mid fairings and drop them to the floor. However i already removed the flappers and all the lines and solonoids.
Once you have taken of the inner covers and ram air cover on the upper cowl, just unclip the first 3 trim clips on the inner cowl thats inside the front of the left middle cowl coz theres a harness inside, you need to unclip it from the trim clip that runs throught the innercowl/ram air duct into the left middle cowl. Also undo the allen head bolts that connect the inner cover to upper cowl,
tug a bit on the ram air ducts to unseat them, then you can drop the whole lot to the floor in one peice.
still sucks , but it not to bad once u know it.........
- Status
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
