Honda CBR 1000RR Forums banner

1 - 4 of 4 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter #1
can anyone tell me if when the forks bottom out on 2010cbr, do the dust seals on the forks make contact with the bottom of the fork leg or is there a slight gap between seal and fork bottom.
 

·
Premium Member
Joined
·
14,400 Posts
they will not hit the top of the fork bottom. you will have a bit of a gap.

if the forks have had the hydraulic stop removed, they can bottom out.
 

·
Registered
Joined
·
806 Posts
+1

There should be about 13mm left when they bottom...

they will not hit the top of the fork bottom. you will have a bit of a gap.

if the forks have had the hydraulic stop removed, they can bottom out.
 

·
Registered
Joined
·
1,350 Posts
what about on a 2012-2016 with the Showa BPF?
Based on the service manual travel (110mm) and my topped out measurement (114mm) there is only 4mm from the fork bottom til bottom out. Sound correct or am I missing something
 
1 - 4 of 4 Posts
Top