Honda CBR 1000RR Forums banner

American ECU / European harness compatibility

2232 Views 2 Replies 2 Participants Last post by  tekilatex
Hi everybody,

I would like to know if it is possible to use an american ECU with an european harness.

Does anyone know the differences between american harness and european ?

Thanks in advance.
1 - 3 of 3 Posts
If you search this it has been discussed at length many times...


...but I'll help you out this time.

If your bike has the HISS on it, the American ECU will not work unless you also use an American wire harness.

We do not use the HISS in America.


Hi everybody,

I would like to know if it is possible to use an american ECU with an european harness.

Does anyone know the differences between american harness and european ?

Thanks in advance.
The job is done !!!!

I give you the methodology :

1. Connect the pin n°29 of the Grey connector to the yellow plug
2. Disconnect HISS plug

That's all !!!
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top