CRAP! where do these screws go?

655 Views 8 Replies 4 Participants Last post by 6speed, Apr 30, 2009

6speed

Discussion Starter · Apr 30, 2009

i just finished replacing the stock intake with a carbon fiber one, the pair mod, and changing my air filters & spark plugs...i put it all back together and i found 4 or 5 black screws with white paint markings on the top. where do they go?? the only thing i found in the service manual was 'painted white bolts and screws' for the throttle bodies. but i dont think i touched those??

Save

1 - 9 of 9 Posts

6speed

Discussion Starter · #2 · Apr 30, 2009

it cant be for the throttle bodies, those look like white painted bolts not screws?

See less See more

Save

Slider

· #3 · Apr 30, 2009

velocity stacks

Save

Slider

· #4 · Apr 30, 2009

SP?

Save

red02f4i

· #5 · Apr 30, 2009

If I remember right, there were a couple screws that held the stock intake on and a couple more that held the two pieces together that don't get re-used with the a-tech. They may or may not have white paint on them. There is also one or two that hold the clip for the upper injector harness on the top of the airbox (near the fuel rail).

Save

6speed

Discussion Starter · #6 · Apr 30, 2009

red02f4i said:
If I remember right, there were a couple screws that held the stock intake on and a couple more that held the two pieces together that don't get re-used with the a-tech. They may or may not have white paint on them. There is also one or two that hold the clip for the upper injector harness on the top of the airbox (near the fuel rail).

i was just about to post that up, i think it was keeping the two pieces together of the stock intake. good call! thanks for the input everyone, i remember taking that intake apart to get it out and i must not have kept the screws with the stock part, ill double check tonight. sorry, it just had me in a panic this morning when i saw them.

See less See more

Save

Rotten

· #7 · Apr 30, 2009

If don't have a few left over screws or nuts , you didn't do it right .

Save

Rotten

· #8 · Apr 30, 2009

I was just about to offer you some help , but then realized Kutztown is far away from york .

Save

6speed

Discussion Starter · #9 · Apr 30, 2009

yea its a good hour+ thanks though! now all i have left is wire up the HIDs and get the plastics back on

Save

1 - 9 of 9 Posts

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.

CRAP! where do these screws go?

6speed

6speed

Attachments

Slider

Slider

red02f4i

6speed

Attachments

Rotten

Rotten

6speed

Top Contributors this Month