Honda CBR 1000RR Forums banner
1 - 1 of 1 Posts

·
Classifieds Moderator
Joined
·
709 Posts
That is unacceptable for MLS head gasket, which requires a fine surface finish. Also they ground off chamfer and didn't re-chamfer the bore so you'll have a hard time putting pistons back in. This is why typically the cylinder head is decked, not the block.

It should be reground on a surface grinder but this it's aluminum so need to send it to a shop like Millennium Tech that knows what they are doing.
 
1 - 1 of 1 Posts
Top