This is a set of Erion Racing cams I bought a while back, but never used. As best I can tell, these cams are stock lift with more duration. I measure the lobe heights at .350"/.327" In/Exh . The cams will need approximately 2.5mm shims on the intake and 2.35mm shims on the exhaust. That's all I know about the cams
![Reed instrument Wind instrument Musical instrument Woodwind instrument Art]()
![Reflex camera Camera lens Camera accessory Cameras & optics Lens]()
![Musical instrument Reed instrument Wind instrument Office supplies Woodwind instrument]()
![Natural material Cylinder Font Tints and shades Magenta]()
![Automotive tire Motor vehicle Rim Automotive wheel system Gas]()
![Natural material Cylinder Font Bicycle part Metal]()
