Honda CBR 1000RR Forums banner

Launch Master 2-Step

3432 Views 4 Replies 4 Participants Last post by  cbr9rider
Has anyone had any success installing MSD PN-4350 2-Step on their Honda? They say it wont work on a CDI igntion however I believe I have mine nearly there. I have constant activation on the unit even without the blue wire hooked up to the clutch activation ground.. When I disconnect the black ground from the chassis and hook up the blue activation to the correct (solid black) clutch activation ground wire, the unit acts like it should (powers up only with clutch pulled in gear or in neutral). However as soon as I let the clutch out the unit LED goes out and the bike stalls.
1 - 5 of 5 Posts
im looking into it but i hsvent bought it yet. what year bike do u have?
07 600rr
Are you sure you have a CDI ignition? Most 2007 CBR600RRs don't. Did you add a CDI ignition to it?
It worked fine on my 06 cbr1000
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.