Honda CBR 1000RR Forums banner
1 - 8 of 8 Posts

·
my 50 says you suck
Joined
·
398 Posts
Discussion Starter · #1 ·
I was drinking the other night and decided I don't like the two holes on the stock muffler. I didn't want a slip on because I like the quit bike (I'm old). So I cut the back off and changed the two tubes and holes to one oval. Nothing changed but the look.
 

Attachments

·
my 50 says you suck
Joined
·
398 Posts
Discussion Starter · #7 ·
Thack,

Looks good! Any chance of some close ups? Need to see what you did to the two internal tubes

Cheers.
Sorry it's taken so long to get back to this. Basically I cut the back plate off, cut the last 4" so I could cut the Ti tubes shorter. Then cut up the original back plate to connect the new oval tube. Can't weld stainless to Titanium :D took 2 stainless tubes cut half off leaving 1" untouched welded those to the old back plate (now a coupler). Adding a 2" plate to make the oval then fabed up a new tail cone, which still needs some finish work. I thought the shield covered more.
 

Attachments

1 - 8 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top