Honda CBR 1000RR Forums banner

need help with PCV install.

1676 Views 6 Replies 4 Participants Last post by  diddy2003
hey fellas...im trying to install my PCV today and i got somewhat far. but im not sure what all the plugs are for. i managed to plug the ones that fit into the injector ports but i dont know where the TPS is, and why there are 2 plugs for each. where does the second smaller plug go for each injector and what is the second plug for the TPS go for? any immediate help would be HIGHLY appreciated. THANK YOU!!!
1 - 7 of 7 Posts
I don't have a PCV but the instructions seem fairly straight forward. PCV instructions

Someone who has done the installation should chime in.
finally got it! thanks for that. these instructions have clearer images that help. now my next dilemna.....how do i connect the Zbomb?
now my next dilemna.....how do i connect the Zbomb?
Plug it in between the stock harness and the PCV.

ECU > stock harness > Z bomb > PCV > TPS
Plug it in between the stock harness and the PCV.

ECU > stock harness > Z bomb > PCV > TPS
^Same goes for Bazzaz, right?
^Same goes for Bazzaz, right?
Yeah it has to go in that order or you fuel management will get false input from tps. PCV or whatever has to be plugged into the tps directly.
Yeah it has to go in that order or you fuel management will get false input from tps. PCV or whatever has to be plugged into the tps directly.
Does anyone have a good picture of how it goes together? I have a install picture of the dynojet IRC. I probably works the same but it kind of hard to see in the picture.


I am sure I can figure it out I just am one of those people that want to be 100 percent sure before I do anything.
See less See more
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top