Thanks for the pics bro. I just ordered a clear light off of ebay. I was wondering how it would look with the silver bike. Looks great! Mine is not the clear alternatives, but the cheaper one from an ebay vendor. Looks and specs were the same, but only paid $74 for mine shipped. CA wanted $140 plus shipping. Think I will mount my plate further under the rear. May be too far back where yours is. Kind of takes away from the lines a little, but still a nice install!
R&G Tail Tidy + Clear Alternatives
Finally got around to taking pictures after the install. Went with some small turn signals in addition to the integrated signals in the CA taillight.
Picture #7 shows the brake lights for both the CBR (on the right) and my stock V-Strom.
Picture #8 shows the right turn signals working together (integrated + small LED mounted on the R&G bracket). The small LED signals are pretty dim but the two signals working together show up well.
Picture #7 shows the brake lights for both the CBR (on the right) and my stock V-Strom.
Picture #8 shows the right turn signals working together (integrated + small LED mounted on the R&G bracket). The small LED signals are pretty dim but the two signals working together show up well.
Attachments
1 - 11 of 11 Posts
I scrapped that joke of a plate light, and mounted the plate from the bottom to use the tailight as a plate light.
![]()
more pics:http://www.1000rr.net/forums/showthread.php?t=60472
more pics:http://www.1000rr.net/forums/showthread.php?t=60472
1 - 11 of 11 Posts
