Honda CBR 1000RR Forums banner
1 - 11 of 11 Posts

·
I'm slower then you
Joined
·
1,394 Posts
Discussion Starter · #1 ·
How did you guys do it?

This is my daily transportation, so I can't really just start taking things apart in guess work, since I might just have to jump on it to get to work :D
 

·
Registered
Joined
·
738 Posts
Sidewalk said:
I was more wondering how you unbolted it, when everything is covered.
You have to remove or at least pull up the rear cowl.Remove the seat then there are 4 bolts to get the cowl off. Then the Pplastic garb is bolted on w/only a few bolts....pretty simple. The most tedious part is getting the cowl off....kinda tricky....need to do some bending and twisting. :D
 

·
I'm slower then you
Joined
·
1,394 Posts
Discussion Starter · #7 ·
Thorn92 said:
Sidewalk said:
I was more wondering how you unbolted it, when everything is covered.
You have to remove or at least pull up the rear cowl.Remove the seat then there are 4 bolts to get the cowl off. Then the Pplastic garb is bolted on w/only a few bolts....pretty simple. The most tedious part is getting the cowl off....kinda tricky....need to do some bending and twisting. :D
Okay, I was trying to do that, but I didn't want to break anything.

Thanks
 

·
Registered
Joined
·
157 Posts
[/quote]Okay, I was trying to do that, but I didn't want to break anything.

Thanks[/quote]

don't worry about breaking it, i was surprised how much it can flex
 
1 - 11 of 11 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top