Honda CBR 1000RR Forums banner
1 - 3 of 3 Posts

·
Registered
Joined
·
25 Posts
Discussion Starter · #1 ·
Hey guys, I want to change out the front brake lines but i can only find a 2lin kit. I would like to keep the stock setup which is 3 lines what do i do or where can i find the kit I want, Black on Black....????
 

·
blue power ranger
Joined
·
197 Posts
Hey guys, I want to change out the front brake lines but i can only find a 2lin kit. I would like to keep the stock setup which is 3 lines what do i do or where can i find the kit I want, Black on Black....????
Actually the stock setup is a single line split at the fender .
The two line kits work great but if you HAVE to keep it like stock or similar .Galfer makes a gp brake kit (single off the master and splits the calipers).
 

·
Pro Member
Joined
·
1,512 Posts
Actually the stock setup is a single line split at the fender .
The two line kits work great but if you HAVE to keep it like stock or similar .Galfer makes a gp brake kit (single off the master and splits the calipers).
Stock set up is a 3 line kit. Single line would be just 1 brake line. Galfer GP is the exact same setup as stock only the lines are routed in front of the forks, however they can customize your kit to be routed just like the stock lines.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top