is your exhaust stock or aftermarket? i have a lot of vibration in my right peg after putting a slip-on on. my foot doesn't go numb though
Serious vibrations 2008 Blade..
I am experiencing serious what seems to be engine vibrations on the right rear set peg and passenger peg and it is becoming increasingly annoying as my foot goes very numb after just 5 minutes. It is most profound from 5K rpm and above.
Does anyone know if:
1. This is common on this bike?
2. There is a fix to this that I should know about?
Does anyone know if:
1. This is common on this bike?
2. There is a fix to this that I should know about?
1 - 15 of 15 Posts
Stockis your exhaust stock or aftermarket? i have a lot of vibration in my right peg after putting a slip-on on. my foot doesn't go numb though
Anyone else?
Gonna try and talk to the dealer about this, but not optimistic as I am in Korea and the level of customer service when it comes to bikes by experience is a bit poor
I really need to get to the bottom of this as I don't think I can keep the bike if I don't fix it....it really is that bad.....
Swapped bikes with a friend on a gixxer K5 yesterday and the guy was all over the place about this vibration.
Gonna try and talk to the dealer about this, but not optimistic as I am in Korea and the level of customer service when it comes to bikes by experience is a bit poor
I really need to get to the bottom of this as I don't think I can keep the bike if I don't fix it....it really is that bad.....
Swapped bikes with a friend on a gixxer K5 yesterday and the guy was all over the place about this vibration.
i get some vibrations on the right footpeg too, and my right foot goes numb after a while but i dont know if is that bad or notAnyone else?
Gonna try and talk to the dealer about this, but not optimistic as I am in Korea and the level of customer service when it comes to bikes by experience is a bit poor
I really need to get to the bottom of this as I don't think I can keep the bike if I don't fix it....it really is that bad.....
Swapped bikes with a friend on a gixxer K5 yesterday and the guy was all over the place about this vibration.
do you ride on your toes?
What kind of shoes/boots/flip flops (j/k) do you ride in? Maybe some heavier duty riding boots my help to quell the vibration some.
same thing here, but i have an 07. right peg. vibes.. oh well.
Have you had the clutch recall done yet, it may be your clutch missing bits of plate and causing vibration. Get it looked at asap.
that could be possible on my bike but not on his, his bike is an 09, not clutch updated neededHave you had the clutch recall done yet, it may be your clutch missing bits of plate and causing vibration. Get it looked at asap.
No, mine is a leftover 2008....got to check that clutch update..was that for all 2008 bikes?that could be possible on my bike but not on his, his bike is an 09, not clutch updated needed
From the first page of the 08 CLUTCH 'PRODUCT UPDATE' IMPORTANT!:No, mine is a leftover 2008....got to check that clutch update..was that for all 2008 bikes?
Hey guys, honda has released a 'Product Update Campaign' for alot of the 2008 cbr1000rr. If you have an 08 with the following VINs please contact your local dealer so that you can be first on the list for the update-
JH2SC590*8M000001 THRU JH2SC590*8M010632
JH2SC594*8M000001 THRU JH2SC594*8M000559
JH2SC591*8M000001 THRU JH2SC591*8M001693
JH2SC595*8M000001 THRU JH2SC595*8M000087
(* denotes check digit)
The dealers should either have the update in stock or have it on the way. You will be recieveing a letter in the mail also if this update concerns you. If you are not satisfied with the service your dealer provides for you or experiance any problems, you can contact Honda at
American Honda Motor Co., Inc.
Motorcycle Customer Support
Mail Stop 100-4c-7b
1919 Torrance Blvd.
Torrance, CA 90501-2746
(866) 784-1870
If I can do anything at all to help please feel free to contact me at any time. Thanks!!
Jeremy
Thanks 2008 RR.
Come to think about it, Diddy2003 did mention this in his review of the bike.
I'll check the VIN on my bike.....might not be there since I have a EU version ?
Come to think about it, Diddy2003 did mention this in his review of the bike.
I'll check the VIN on my bike.....might not be there since I have a EU version ?
when i swapped over to the taylormade exhaust i noticed that the right footpeg would get vibration from time to time. not bad enough to make me go numb.
Yeah, I think those vins are for North America at best. In your case I would call either the local dealership or Honda customer service for your region.I'll check the VIN on my bike.....might not be there since I have a EU version ?
1 - 15 of 15 Posts
- This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Honda CBR 1000RR Forums
A forum community dedicated to Honda CBR 1000RR motorcycle owners and enthusiasts. Come join the discussion about troubleshooting, performance, modifications, classifieds, maintenance, and more!
Full Forum Listing
Explore Our Forums
