Sub-Frame Torque Specs

1433 Views 5 Replies 3 Participants Last post by Deathace, Apr 27, 2009

sprout

Discussion Starter · Apr 27, 2009

Good Evening All,

I just finished removing the rear pegs from my 08 1000rr and was wondering if someone had the torque specs for the two main sub frame bolts on the sides below the gas tank? One screws into the frame and the other had a nut on the inside of the frame. They are the 14MM bolts. Thank you in advance for your assistance. Have a good evening!

Cheers,
Sprout

Save

1 - 6 of 6 Posts

h82loze

· #2 · Apr 27, 2009

Seat rail mounting nut=40 lbf*ft or 54 N*m
Seat rail mounting bolt=32 lbf*ft or 44 N*m
The values are in the service manual. If you don't have it, you can download it from Deathace (it's in his sig).

Save

sprout

Discussion Starter · #3 · Apr 27, 2009 (Edited)

h82loze said:
Seat rail mounting nut=40 lbf*ft or 54 N*m
Seat rail mounting bolt=32 lbf*ft or 44 N*m
The values are in the service manual. If you don't have it, you can download it from Deathace (it's in his sig).

Sorry to be a newb... but is the mounting nut the lower one and the mounting bolt the upper one closest to the tank? Thanks again for the support

Save

h82loze

· #4 · Apr 27, 2009

Yup

Save

sprout

Discussion Starter · #5 · Apr 27, 2009

Thank you very much for the confirmation. Havce a great night!

Sprout

Save

Deathace

· #6 · Apr 27, 2009

Sprout: clicky click below the manual has all the torque values for your bike and very useful sections that you may need if your doing anything to your bike.

Enjoy

Russ

Save

1 - 6 of 6 Posts

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.

Top Contributors this Month