[Mahu7447]

Hello, I’m having a issue with my sc82 Cbr where the throttle body is not open as it should. When I start the bike it idles for like 2 sec and shuts of. And there seems to be no DTC codes. I thought it was my new air filter so I found my old stock one and put it in. Even then no luck. So then I proceeded to check by plugin everything and checking the throttle body. And to my surprise it wasn’t opening as it should as it was skipping from a little open to full open there wasn’t an in between. I even took apart the throttle body motor to see if it was missing a tooth. But all looked fine I do have a video but I’m new here and don’t know how to upload it here

 

[J D]

You’re going to have to link the video via YouTube or what other service you use.

 

[Mahu7447]

The current issue I’m having is. The bike when I got it from Japan I imported it all disassembled. Engine intact but everything all apart. Anyways. The issue is the bike only shows the error code 34. I’m waiting for the exhaust valve servo eliminator so that would also go away. The bike will crank and it would start. Then it would immediately stall. And when I crank again the same thing keeps happening. At this point I have no idea what’s wrong. i have bought the service manual and even went threw all the issues i have encountered and after all the checks and tests it points to the ECM is the problem. the bike has 3200 something Kms. Funny thing is it started once and I was even able to ride it around the block for a few times. But now this is happening. If you can help me out I would really appreciate it.