Honda CBR 1000RR Forums banner
1 - 2 of 2 Posts

·
A1 SuperMod!
Joined
·
1,099 Posts
I haven't worked on the newer bikes, so I'm not sure if it's an o-ring or some type of sealant. If there's no o-ring then use Loctite 518 to seal the drain plug after cleaning off the stock sealant, which appears yellow in the picture.

I know Honda uses that yellow sealant for the oil pressure sensor bung and oil channel plug in the crankcase. That what it looks like from the residue in the picture.
 
1 - 2 of 2 Posts
Top