Honda CBR 1000RR Forums banner

1 - 14 of 14 Posts

·
Registered
2018 Honda CBR1000RR -- KCS Tune, Unrestricted, Akrapovic Ti header and Akrapovic Ti GP Slip-on.
Joined
·
91 Posts
Discussion Starter · #1 ·
I’m not liking the fitment of the Zero Gravity windscreen on my 2018 CBR1000RR.

The holes at the top end are too far inward causing the windscreen to push away from the edge of the factory plastic.

Also had to trim the top edge a little because it was hitting the raised edge on the factory plastic, farther pushing the screen away causing an ugly gap.

Sucks because I was really looking forward to this mod.

08A13EBA-7EA5-4C8F-B43D-D2737F5BAB33.jpeg


A517D18F-A80F-4F23-95F4-075A94495A57.jpeg


EFF15ACB-994D-4523-8CB4-F70603695169.jpeg
 

·
Registered
Joined
·
426 Posts
I've said it before, but the matte black looks great.

Have you contacted Zero Gravity to see what they think?
 

·
Registered
2018 Honda CBR1000RR -- KCS Tune, Unrestricted, Akrapovic Ti header and Akrapovic Ti GP Slip-on.
Joined
·
91 Posts
Discussion Starter · #9 ·
I've always had good luck with Puig.
There is a long thread on here with a lot of people claiming that brand also fits like crap.

I might just take the stock screen and have it tinted.

The ZG screen will go in the garbage.
 

·
Registered
Joined
·
213 Posts
I have always had good luck with puig also. The stock screen on my sc77 is good, and looks good, but for when I want to get briefly above 150mph, the screen provides little n aerodynamics for me. It seems that if you are keeping it under 150, the stock one is fine.
 
1 - 14 of 14 Posts
Top